32
Setup
VCR and Cable
For best results, use this connection if:
s
Your cable company does not require you to use a cable box.
To connect the VCR and cable
1
Connect the CATV cable (not supplied) to the VCR’s VHF/UHF input
jack.
2
Use the 75-ohm coaxial cable to connect the VCR’s VHF/UHF output
jack to the TV’s CABLE input jack.
3
Use an A/V cable (not supplied) to connect the VCR’s A/V output jacks
to the TV’s A/V input jacks (VIDEO 1 or 3).
4
Run the Auto Program function, as described in “Setting Up the
Channel List” on page 53.
About Using This Connection with Dual Picture (Twin View, etc.) Features
With this connection, you can use all the dual picture features.
Using S VIDEO jacks? See page 31.
CABLE
R-AUDIO -L
VIDEO
S VIDEO
VIDEO IN
1
3
(MONO)
Rear of TV
A/V cable
(not supplied)
75-ohm
coaxial cable
CATV cable
(not supplied)
VCR
