Getting Started
8
Getting Started
1.
Connect the TV plug to your mains socket (220 - 240V AV, 50Hz)
2.
Push in the On/Off button (labelled
!
) on the front of the TV.
z
If the red standby mode indicator on the front of the TV is lit, press the TV I/
1
button on the remote control to switch on the set. Please be patient as the picture
may take a few moments to appear on the TV screen.
1.
When you switch on the TV for the first time a menu appears on the
screen asking you to check if the picture is slanted. (Sometimes the
Earth’s natural magnetism can cause the screen to look slanted.)
a) If no correction is required, press the
V
or
v
button to highlight ‘Not
necessary’. Press the OK button to continue.
b) If some correction is required, press the
V
or
v
button to highlight
‘Adjust now’. Press the OK button to continue. Press the
V
or
v
button
to correct the slant. Press the OK button to store.
2.
The autotune prompt appears. Press the OK button to select ‘Yes’. The
autotune procedure begins.
3.
The ‘Region Set-up’ menu appears on the TV screen. Press the
V
or
v
button to highlight your chosen region. Press the OK button to confirm.
The digital autotune display appears on screen and the TV starts to
search for all the available digital channels. This may take some time,
please be patient and do not press any buttons on the TV or remote
control.
If no digital or analogue channels are found, a message appears asking
you to confirm that the aerial is connected correctly. Check all the aerial
connections and press the OK button to start the autotune procedure
again.
When the digital autotune is complete, the analogue autotune starts to
search for all the available analogue channels.
Once all available digital and analogue channels have been stored, the
TV returns to normal operation, displaying the first available digital
channel (usually stored on channel number 1). If no digital channels are
found, the TV displays the first available analogue channel (usually
stored on channel 1).
The TV has now tuned
in all the available channels
1.
Press the DIGITAL/
a
button to switch between digital and analogue
mode.
In digital mode, an information banner appears briefly on screen when
the channel is changed.
In analogue mode, the channel number appears in green lettering when
the channel is changed.
Automatically tuning the TV
5
Switching on the TV
4
Switching between digital and analogue mode
6
If picture slants, please
adjust picture rotation
Not necessary
Adjust now
OK
Do you want to start
automatic tuning?
Yes
No
OK
On/Off button
The ‘Autotune’ prompt.
The ‘Picture Rotation’ menu.
