WLA-NWB1K [GB] 3-196-849-12(1)
22
WLA-NWB1K [GB] 3-196-849-12(1)
Re-pairing the transmitter and the headset
1
Connect the transmitter to the Walkman (page 13).
The power of the transmitter turns on.
2
Press and hold the power button of the transmitter for about 2
seconds to turn it off.
3
Place the transmitter and the headset to be paired together
within 1 m.
4
Press and hold the POWER button of the headset for more than
about 7 seconds to enter “Pairing in process.”
After about 3 seconds, the headset indicator (red) and the
headset indicator (blue) will flash twice, but keep pressing the
POWER button.
Release the POWER button when the headset indicator starts
flashing quickly. The headset enters the pairing process.
5
Press and hold the power button of the transmitter for about 7
seconds or more to enter “Pairing in process.”
After about 2 seconds, the transmitter indicator will flash twice,
but keep pressing the power button.
Notes
“Pairing in process” is released after about 5 minutes. If pairing is not
established within about 5 minutes, repeat the above procedure from step
1
.
To enter “Pairing in process,” you need to turn off the power of the
transmitter first.
