WLA-NWB1K [GB] 3-196-849-12(1)
20
WLA-NWB1K [GB] 3-196-849-12(1)
Pairing headset with other Bluetooth transmitting devices
1
Place the Bluetooth transmitting device to be paired together
within 1 m of the headset.
2
Press and hold the POWER button of the headset for about 7
seconds or more to enter “Pairing in process.”
Release the POWER button when the headset indicator starts
flashing quickly. The headset enters the pairing process.
3
Turning Bluetooth transmitting device to pairing standby
mode.
(See the operating instructions supplied with the Bluetooth
transmitting device.)
The list of detected devices appears on the display of the
Bluetooth transmitting device.
The headset is displayed as “DR-BT21G.”
This headset indicator status will vary as follows, and pairing is
established with the Bluetooth transmitting device.
The headset indicator flashes quickly: Pairing in process
The headset indicator flashes when responding to the Bluetooth
transmitting device: Pairing successful
The headset indicator flashes (at about 5-second intervals):
Connectable
Note
Passcode* of the headset is fixed at “0000.” Depending on the Bluetooth
receiving device, it may be necessary to input the passcode (in this case,
“0000”). The headset cannot be paired with a Bluetooth receiving device whose
passcode is not “0000.”
* Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”
