WLA-NWB1K [GB] 3-196-849-13(1)
14
WLA-NWB1K [GB] 3-196-849-13(1)
Listening to music of the Walkman
You can listen to music of the Walkman on the headset.
1
Press and hold the POWER button on the headset for about 3
seconds.
The headset indicator (blue) and headset indicator (red) flash
together twice and the headset is turned on.
2
Connect the transmitter to the Walkman then turn on the
Walkman.
The transmitter indicator status will vary as follows, and the
Bluetooth connection between the transmitter and the headset
is established.
Transmitter indicator flashes twice: Power is on
Transmitter indicator flashes (at about 1-second intervals):
Connecting in process
Transmitter indicator flashes twice: Connecting successful
Indicator flashes slowly (at about 5-second intervals):
Connecting
If the Bluetooth connection is not established within 5 minutes,
the transmitter automatically turns itself off. In this case, turn
it on again by pressing and holding the power button on the
transmitter for about 2 seconds.
Note
If you want to establish the Bluetooth connection with a Bluetooth device that
is paired before either of the last two devices recognized, turn on the unit and
establish the Bluetooth connection from the Bluetooth device while the unit’s
indicator flashes slowly from 10 to 13 times (for about 10-13 seconds). If the
problem persists, pair the devices again.
Operating
