manualshive.com logo in svg

Sony WALKMAN NW-ZX505, Service Manual, Page: 36 / 64

Share
Download
Sony WALKMAN NW-ZX505 Service Manual Download Page 36

NW-ZX505/ZX507

36

Sony CONFIDENTIAL

For Authorized Servicer

2-13.  HP  SE  ASSY (STEREO  MINI),  SUPPORT  BATTERY  ASSY-2,  JACK  RING (S) (STEREO  MINI  SIDE),  

JACK  HOOK (S) (STEREO  MINI  SIDE)

•  Continued on 2-14 (page 37).

front side

top side

bottom side

top side

– Inner view –

top side

hole

hole

jack ring (S) assy

jack ring (S) assy

cabinet

top 
side

– Top view –

‡+RZWRLQVWDOOWKHMDFNKRRN6

jack hook (S)

3

 Lock the 

 three 

claws.

3

 Rotate the jack hook (S) 

 counter-clockwise 

to 

 

remove the lock.

2

 Rotate the jack hook (S) 

 clockwise.

1

 Align the jack hook (S) with the hole

 

shape of the cabinet and install.

tweezers, 
etc.

2

 jack ring (S) assy

4

 jack 

 hook 

(S)

1

 Insert the clip, etc. into the hole from the inner side 

 

of the cabinet, and then push the jack ring (S) assy 

 

upward from the inner side.

clip, etc.

Attach in order from 

1

 to 

3

.

clip, etc.

cabinet

Ver. 1.1

SYS SET

2019/12/13 00:24:41 (GMT+09:00)

Summary of Contents for WALKMAN NW-ZX505

































































Reviews:

No comments