NW-ZX505/ZX507
31
Sony CONFIDENTIAL
For Authorized Servicer
2-8. LITHIUM ION STORAGE BATTERY-1
• Continued on 2-9 (page 32).
front side
top side
bottom side
1
sheet (wire detector)
2
Remove the solder of
the battery wire [white].
(See Note 1)
3
Remove the solder of
the battery wire [black].
(See Note 1)
4
Remove the solder of
the battery wire [red].
(See Note 1)
5
Remove the solder
of the battery sheet.
Attach in order from
1
to
7
.
2
Soldering the
battery
sheet.
top side
:LUHVHWWLQJ
battery support
battery assy
MAIN board
1
Press the battery
sheet to the side
of the battery
support.
3
Soldering the
battery wire [red].
5
Soldering the battery
wire
[white].
4
Soldering the battery
wire
[black].
lower: [black]
upper: [white]
HP BTL detect wire
6
Push the HP BTL detect wire
in the direction of the arrow.
7
sheet (wire detector)
OK
NG
HP BTL detect wire
HP BTL detect wire
Note 2:
Arrange the HP BTL detect wire so that
it does not overlap the chip parts.
Note 1:
When wire of the battery assy is removed from MAIN board, insulate
the end of wire by wrap of a tape etc. to prevent short-circuited of the
wire part of the battery assy.
SYS SET
2019/12/13 00:24:41 (GMT+09:00)
