NW-ZX505/ZX507
26
Sony CONFIDENTIAL
For Authorized Servicer
2-3. REAR PANEL BLOCK-1
• Continued on 2-4 (page 27).
protection
sheet
protection
sheet
– Rear view –
– Left view –
– Right view –
Paste near the rear
panel spring.
Paste near the rear
panel spring.
Paste near the rear
panel spring.
Paste near the rear
panel spring.
protection
sheet
rear panel spring hole
front side
bottom side
top side
1
two screws
(P1.4
u
5)
2
two screws M1.4
(L = 5.0 mm)
Continued on next page.
rear panel spring
A
rear panel spring
B
rear panel spring
C
rear panel spring
D
< Preparation 1. Preparing a clip >
< Preparation 2. Protecting the edges of the cabinet with protection sheets >
2
Hold the prepared clip as shown below.
1
Prepare a clip (diameter 0.8 mm) and bend
it to the shape as shown below.
Prepare the protection sheets and affix them to four places on the cabinet assy.
3
Insert the prepared clip into
the rear panel spring hole.
Note
1:
Take care not to touch
the edges of the cabinet.
4
Press the prepared clip
in the direction of the
arrow to release the lock.
prepared
clip
Note 2:
Release the locks of the rear panel springs
in the order of
A
,
B
,
C
, then
D
.
SYS SET
2019/12/13 00:24:41 (GMT+09:00)
