Sony Walkman MZ-NF810CK, Operating Instructions Manual

Page: 72 / 128

72
6
Press the jog lever to enter the
selection.
A long beep sounds in the
headphones/earphones. “PRESET”,
“
M
”, and preset number disappear in
the display.
Listening to the preset
radio stations
You can simply tune the station by
selecting the preset number.
1
Press RADIO ON/OFF to turn on the
radio.
2
Press the jog lever repeatedly to select
the band.
USA model: “FM”
t
“AM”
t
“TV”
t
“Wb (weather)”
Canadian model: “FM” t “AM”
3
Press P-MODE/ so that
“PRESET” appears in the display.
4
Slide the jog lever towards TUNE +
or TUNE – repeatedly until the
desired preset number appears in the
display.
Receiving stations in
another country
The frequency step differs according to
the geographical region. If you cannot
tune in stations clearly while in another
country, try changing the frequency step
to match that of the particular region.
1
Press RADIO ON/OFF to turn on the
radio.
2
Press and hold DISPLAY until “A
Preset” appears in the display.
3
Slide the jog lever repeatedly until
“Step” appears in the display, and
then press the jog lever.
4
Slide the jog lever repeatedly until
“Step10k” or “Step9k” appears in the
display.
The frequency interval for each step
is as follows.
5
Press the jog lever to enter the
selection.
Note
After changing the frequency interval, you need
to preset radio station.
Jog lever
(BAND, TUNE –, TUNE +)
RADIO ON/OFF
P-MODE/
Band Step10k Step9k
FM 100 kHz 50 kHz
AM 10 kHz 9 kHz
Jog lever
(BAND, TUNE –, TUNE +)
RADIO ON/OFF
DISPLAY