51
Using the group function
What is the group
function?
The group function is provided to allow
playback of discs with group settings. The
group function is convenient for playback
of MDs on which several albums or CD
singles have been recorded in MDLP
(LP2/LP4) mode.
What is a disc with group
settings?
The recorder can operate various
functions in units of group; that is tracks
that have been recorded on a disc as a part
of separate groups, as shown below.
You can create a maximum of 99 groups
on a disc.
Note
It will not be possible to make a group setting if
the tracks, groups and disc name on a disc
exceed the maximum number that can be input.
Recording tracks using
the group function
Recording a track to a new
group
You can add a new group at the end of the
currently recorded tracks on a disc when
recording.
1
While the recorder is stopped, press
END SEARCH.
2
While pressing GROUP, press and
slide REC.
3
Play the source sound.
A new group will be added after the
current contents on a disc.
To stop recording
Press
x
.
The material that was recorded up until
x
was pressed is entered as a new group.
1 2
4 5 6 7 8
12131415
3
1 2 3 4 5 6 7 1 2 3 4 5
1 2 3
Before group settings are made
After setting the group
Group 1
Group 3
Group 2
Track 1 to 5 are assigned to group 1.
Track 8 to12 are assigned to group 2.
Track 13 to15 are assigned to group 3.
Track 6 to 7 are not assigned to a
group.
Tracks that were not assigned to a group
are treated as being part of “Group - -”.
Disc
Disc
END SEARCH
5-way control key (
.
,
>
)
GROUP
REC
Summary of Contents for Walkman MZ-NF810CK
Page 5: ...5 ...
Page 126: ......
Page 127: ...This warranty is valid only in Canada ...
Page 128: ...Printed in Malaysia This warranty is valid only in the United States ...
