Sony VPLGH10, Operating Instructions Manual

Page: 20 / 155

GB
20
Tip
You can select the desired language for the menu screen. For details, refer to “Step 4: Selecting the
Menu Language.” (
1 page 24)
Tip
When “Lens Control” is set to “Off” on the Installation menu, you cannot adjust the picture
position. (
1
page 49)
When “Test Pattern” is set to “Off” on the Function menu, the test pattern is not displayed.
( 1 page 48)
To adjust the horizontal position
Press
<
/
,
.
The picture projected on the screen moves right or left by a maximum of 25% of the screen
width from the center of the lens.
2
Press the
?
/
1
(ON/STANDBY)
switch to turn on the projector.
The ON/STANDBY indicator flashes
in green, and then lights in green.
When the ON/STANDBY indicator
flashes, “Starting...” appears on the
screen.
3
Turn on the equipment
connected to the projector.
Refer to the operating instructions of
the connected equipment.
The DVI indication is displayed, and
the picture is projected on the screen.
4
Adjust the picture position.
Press the LENS button repeatedly until
the Lens Shift adjustment window (test
pattern) appears. Then adjust the
proper position by pressing the
M / m /
<
/
,
buttons. Each time you press
the LENS button, the LENS adjustment
window appears in order.
Flashes in green for
a while (tens of
seconds) and then
lights in green.
DVI