Sony VPL-VZ1000ES, Operating Instructions Manual

Page: 27 / 47

27
Reset: Returns to the factory settings.
Preset: The optimized data has been preset.
Depending on the adjustments made above, colors may become uneven or the resolution may change.
Flange Back Correction Adjust the focus by pressing the
M/,/ m/<
buttons.
Tips
• This function is different from the lens focus.
• Normally, there is no need to adjust according to the installation environment. Use this item for
installation in a special environment.
Network Setting Perform Internet protocol settings.
IPv4 Setting IP Address Setup : Selects the IP address setting method.
Auto(DHCP): The IP address is assigned automatically from the DHCP server such as a router.
Manual: Specifies the IP address manually.
When “Manual” is selected for “IP Address Setup,” input “IP Address,” “Subnet Mask,” and “Default
Gateway.” Select each item with the
M
/
m
buttons, then press the button. Select the frame to input with
the
<
/
,
buttons and input the value with the
M
/
m
buttons. When all items are entered, select “Apply,”
and then press the button. The entered settings will be registered.
IP Address : Sets the unit’s IP address.
Subnet Mask : Sets the unit’s subnet mask.
Default Gateway : Sets the unit’s default gateway.
MAC Address : Displays the unit’s MAC address. This cannot be changed.
Apply : Enables the IP address that is set manually.
IPv6 Information Displays the IPv6 information.
When you set the IPv6 IP address, set it on a Web browser (page 29).
Setting items Description
Note