Sony VPL-F430HZ, Service Manual

Page: 86 / 116

2-22 (E)
VPL-FHZ65
2-6-6. Writing of Main/Prism/3DGamma/LookUpTable/Chiral/GCFB/VCS Gain
Data
1. Connect the power cord and set this unit to standby state.
2. Press
the
[I/O]
button on this unit.
The lamp lights and the image is displayed.
3. Double-click QuickAccess3.exe to start the application.
4. Select a target model on the Model pull-down menu.
5. Select Read from Projector on the Read/Write pull-down menu.
6. Select the data type (Main/Prism/3DGamma/LookUpTable/Chiral/GCFB/VCS Gain) on the Data
Type pull-down menu.
7. Click the
[Next]
button.
8. Click the
[Browse...]
button.
The file selection window is displayed.
9. Select the file to be written.
10. Click the
[Next]
button.
11. Select the serial port used for connecting PC on the Serial Port pull-down menu.
Upper line: Serial port number used for connecting PC
Lower line: 38400 (not selectable)
12. Click the
[Next]
button.
The window displaying the file path, model name written in file, unit serial, serial number model
name of this unit, and serial number is displayed.
13. Click the
[OK]
button.
The writing starts. Completed is displayed after completed.
14. Press the
[I/O]
button and set this unit to standby state.
15. Disconnect the power cord from this unit.
16. Click the
[Complete]
button.