background image

Sony Not

e

book Us

er

 G

u

id

e

Using your notebook

36

n

N

Using Memory Stick

This new compact, portable, and versatile recording medium has a data capacity exceeding that of a floppy 
disk. The Memory Stick™ is specially designed for exchanging and sharing digital data with compatible 
products. Because it is removable, it can be used for external data storage.

When the Memory Stick™ erasure prevention switch is set to LOCK, data cannot be recorded or erased.

You can enjoy still images that you have recorded with a Memory Stick compatible video camera recorder or a digital still camera.

Before using Memory Sticks™, you should back up important data.

To avoid damaging data:

Do not remove a Memory Stick™ or turn off the power while the access light is on.

Do not use Memory Sticks™ in locations that are subject to static electricity or electrical noise.

Do not touch the Memory Stick™ connector with your finger or metallic objects.

Do not attach labels other than the supplied label to a Memory Stick™.

Do not bend, drop, or apply strong shock to Memory Sticks™.

Do not disassemble or modify Memory Sticks™.

Do not allow Memory Sticks™ to get wet.

Do not use or store Memory Sticks™ in a location that is subject to:
- Extremely high temperatures, such as in a car parked in the sun
- Direct sunlight

To prolong the life of Memory Sticks™, use the supplied storage case.

Summary of Contents for VAIO PCG-Z600HEK






















































































Reviews: