(
)
UPA-PC105
A
p
pe
nd
ix
Troubleshooting
25
GB
Other Messages
FLS_ERR:
LAMP FAILURE
t
An abnormal condition in the film
scanner lamp caused an error.
Replace the lamp.
FLS_ERR: XX YY
ZZ
t
An abnormal condition in the film
scanner caused a coded error
message (XX YY ZZ) to appear.
Switch the unit and film scanner
off, then switch them on again.
HAERR
t
An internal communication error
occurred inside the unit.
Touch the [Retry] button to
continue the scanning job. If the
same message appears again, touch
the [Cancel] button to cancel the
operation, then shut down the
system and switch the main unit off
and on.
HIGH_TEMP
t
The temperature inside the film
scanner is abnormally high.
Wait a few minutes, then touch the
[Retry] button to continue the
scanning job.
IX240_CARRIER_
OPEN
t
The cover of the IX240 carrier may
be open.
Close the cover of the IX240
carrier.
IX240_CART_IN
t
The IX240 cartridge is still set in
the film scanner.
Remove the IX240 cartridge.
IX240_FEED
t
IX240 film jammed inside the film
scanner.
Touch the [Retry] button then
remove the IX240 film.
IX240_NDEV
t
Undeveloped IX240 film is loaded
in the film scanner.
Load only developed IX240 film in
the film scanner.
MECHA_ERR:
STAGE_MOTOR
MECHA_ERR: FILM
MOTOR
MECHA_ERR:
LENS_ MOTOR
MECHA_ERR:
P_PLATE
MECHA_ERR:
LIGHT
MECHA_ERR:
UD_POS
MECHA_ERR:
LR_POS
MECHA_ERR:
DX_SEARCH
t
An abnormal condition inside the
film scanner caused an error.
Call for service.
NGBUFF
t
An abnormal condition inside the
film scanner caused an error.
Touch the [Retry] button to
continue the scanning job. If the
same message appears again, touch
the [Cancel] button to cancell the
operation, shut down the system,
then switch the main unit and film
scanner off and on.
Message
Meaning/Solution
NO_CARRIER
t
The carrier is not set in the film
scanner.
Set the carrier in the film scanner.
NO_TARG
RESERVE
t
An error occurred during
communication between the unit
and the film scanner.
Confirm the following:
•
Film scanner power switch on.
•
SCSI cable connection secure.
•
SCSI ID assigned to the film
scanner is not in use by another
device.
•
SCSI terminator is set correctly.
Then touch the [Retry] button.
If the same message appears again,
touch the [Cancel] button to cancell
the operation, shut down the
system, then switch the main unit
and film scanner off and on.
SYS ERROR: XX YY
ZZ
t
An abnormal condition in the film
scanner caused a coded error
message (XX YY ZZ) to appear.
Touch the [Retry] button to
continue the scanning job. If the
same message appears again, touch
the [Cancel] button to cancell the
operation, shut down the system,
then switch the main unit and film
scanner off and on.
SLD_HOLDER
t
A slide is still in the carrier of the
film scanner, or the holder may be
open.
Remove the slide from the film
scanner.
Message
Meaning/Solution
Unable to initialise.
Please insert another
new CD.
t
Write operation to the CD-R failed.
Insert a new CD-R then touch the
[Retry] button to continue the
operation.
Please ask shop staff
for assistance.
t
A used CD-R was inserted for the
write operation.
Insert an unused CD-R.
Unable to read. Make
sure your media.
(xx:Error Code/String)
Return to opening
screen.
t
The image data on the storage
media cannot be read.
Store the images on another storage
media and then tray again. If the
same message appears again,
switch the unit off and then on
again.
Message
Meaning/Solution
