(
)
UPA-PC105
A
p
pe
nd
ix
Troubleshooting
24
GB
Photograph Scannning Error Messages
For more details about using the unit connected with a
scanner, refer to the instructions accompanying the
scanner.
Film Scanning Error Messages
For more details about using the unit connected with a
film scanner, refer to the instructions accompanying the
film scanner.
PAPER TAG ERROR
t
Cannot read the information from
the IC seal on the paper loaded in
the printer.
Replace the ink ribbon and paper in
the printer with new ones.
RESERVE
t
The printer may be off line.
Confirm that the printer is not off
line, then touch the [Retry] button.
If the same message appears again,
touch the [Cancel] button to cancel
the operation, shut down the
system, then switch the main unit
and printer off and on.
RIBBON END
t
The ink ribbon loaded in the printer
exceeded the specified number of
prints.
Load the allowed number of sheets
in the printer and install a new ink
ribbon.
t
The ink ribbon loaded in the printer
exceeded the specified number of
prints during printing.
Touch the [OK] button to stop the
print job. Load fresh paper in the
printer and install a new ink ribbon.
RIBBON TAG
ERROR
t
Cannot read the information from
the IC seal on the ink ribbon loaded
in the printer.
Replace the ink ribbon and paper in
the printer with new ones.
UNKNOWN ERROR
t
An error of unknown cause
occurred.
Confirm that the connections at the
unit and printer are secure, then
touch the [Retry] button. If the
same message appears again, touch
the [Cancel] button to cancel the
operation, shut down the system,
then switch the main unit and
printer off and on.
Message
Meaning/Solution
Message
Meaning/Solution
SCANNER ERROR
t
An error occurred during
communication between the unit
and the scanner.
Confirm the following:
•
Scanner is on.
•
USB cable connected correctly.
Touch the [Retry] button. If the
same message is displayed again,
touch the [Cancel] button to cancel
the operation, then shut down the
system and switch the main unit
and scanner off and on.
Message
Meaning/Solution
AF_ERR
t
An abnormal condition inside the
film scanner caused an error.
Touch the [Retry] button to
continue the scanning job. If the
same message appears again, touch
the [Cancel] button to cancell the
operation, shut down the system,
then switch the main unit and film
scanner off and on.
CHG_RST_
CARRIER
t
A slide remains inside the carrier of
the film scanner.
Touch the [Retry] button then
remove the slide.
CHG_RST_
CHANGER
t
An abnormal condition in the
changer carrier of the film scanner
caused an error.
If the same message appears again
after touching the [Retry] button,
touch the [Cancel] button to cancel
the operation, then shut down the
system and switch the main unit
and film scanner off and on.
COVER_OPEN
t
Film scanner cover is open.
Close the film scanner cover.
FILM_FEED
t
Film jammed inside the film
scanner.
Touch the [Retry] button, then
remove the jammed film.
FILM_IN
t
Film is still set in the film scanner.
Remove the film from the film
scanner.
FILM_JAM
t
Film jammed inside the film
scanner.
Touch the [Retry] button, then
remove the jammed film.
