Sony UP-D77MD Instructions For Use Manual Download Page 29 | Manualshive

Page: 29 / 32

background image

Set

u

p

About the Setup Window

29

Printer Status Page

This page displays the status of the UP-D77MD.

A

Printer Status display area

Motor/Sensor: Displays the error status or the
motor/sensor system.
Film/Paper Path: Displays whether of not the paper
has jammed in the printing path.
Film/Paper Tray: “OK” is always displayed in case
of UP-D77MD.
Films/Papers: Displays whether or not paper is
loaded on the paper tray. If the paper tray is not
loaded, “Error” is displayed.
Film/Paper Output: “OK” is always displayed in
case of the UP-D77MD.
Ribbon Cassette: Displays whether or not the ink
ribbon cassette is loaded.
Ribbon: Displays whether or not the ink ribbon
remains.
Paper/Ribbon Pair: “OK” is always displayed in
case of the UP-D77MD.
Paper Loading: “OK” is always displayed in case of
the UP-D77MD.
Ribbon Status: Displays whether or not the correct
ink ribbon is loaded.
Printer Engine Status: Displays the printer
operating status (idling, printing and so on)

B

Printer Statistics display area

Displays the total printings performed by the unit.
Print count with the current thermal head: Displays
the total prints after the thermal head has been
replaced.
Lifetime print count: Displays the total prints since
the unit has been shipped.

C

Printer/Media Information display area

Vendor ID, Model Name, Version Number, Media
Type, Media Size, Pixel Matrix, Resolution,
Maximum Density, Minimum Density: Displays
various information on the unit status.
Film/Paper Remaining: “Unknown” is always
displayed in case of the UP-D77MD.

D

Refresh button

Click this button to update the window.

E-Mail Settings Page

This page allows you to perform settings related to E-
mail.

A

Errors/events to monitor setting area

Sets the criteria for sending the E-mail.

B

Mail Server and Address setting area

Performs the setup of E-mail service.

C

Send a test E-Mail button

Press this button to send an E-mail message for
testing purposes.

D

Save settings button

Click this button to save the settings performed on
this page. If you move to another page without
pushing this button, the settings will be lost.

«
...
27
28
29
30
31
...
»

Summary of Contents for UP-D77MD

































Reviews:

No comments

Related manuals for UP-D77MD

Brand: Panasonic Pages: 54

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 8

KX-FLB851 - All-in-One Flatbed Laser Fax

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 12

Brand: Lanier Pages: 3

WORKCENTRE 5050

Brand: Xerox Pages: 186

7500DX - Phaser Color LED Printer

Brand: Xerox Pages: 5

Brand: Kyocera Mita Pages: 209

Brand: Konica Minolta Pages: 61

Brand: Oki Pages: 109

Brand: Tally Pages: 174

Brand: SEWOO Pages: 24

Brand: Magicard Pages: 42

Brand: Star Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands