Sony UP-D70XR, Instructions For Use Manual

Page: 23 / 120

23 Operation
Setting the Print Quantity
You can set a print quantity value up to 20 before or during printing.
1
Press the PRINT QTY button.
The print quantity setting menu is displayed in the printer window display.
( CO L OR 1 0 0 )
PR I N T QT Y : 1
2
Set the quantity with the
ı
or
∫
button.
ı
: The number increases.
∫ : The number decreases.
When you keep the button pressed, the number changes quickly.
( CO L OR 1 0 0 )
PR I N T QT Y : 1 2
3
To exit from the print quantity setting menu, press the PRINT QTY button
again.
The printer window display returns to standby status and you can print the
number of copies of the renewed setting.
A 4 QT Y 1 2
RE ADY
When the print paper runs out during printing
Load the print paper in the paper tray and press the PRINT button. The printer
prints the remaining copies.
Notes
• When you turn off the power, the print quantity setting is reset to 1.
• You can also set the print quantity from the application software.
When the settings of the printer and the application software are different, the
most recently set quantity becomes the effective one.
• The “QTY” value in the printer window display decreases each time one
printout comes out to indicate the remaining copies to be printed.
Number of printouts the remaining ribbon can
afford. (This number is not displayed when using
the blue thermal film.)
1, 3 2
Current setting
Type of ink ribbon being loaded
(COLOR, B&W, LAMI, THERMAL)
Printing quantity changes.
Renewed setting