Sony UP-897MD, Instructions For Use Manual

Page: 54 / 218

Op
er
at
ion
Printing
54
Example: “S:STD” selected from “SIDE” and
“SCL:2.0” selected from “SCALE”
Original image
Difference of the size of the printout depending
on the setting of “SCALE”
Adjusting the Contrast and
Brightness
You can adjust the contrast and brightness of the unit
using the CONTR control and BRIGHT control on the
front panel.
To adjust the contrast
You can adjust the contrast of printouts using the
CONTR control.
To make the contrast stronger: Turn the CONTR
control clockwise.
To make the contrast weaker: Turn the CONTR
control counterclockwise.
To adjust the brightness
You can adjust the brightness of printouts using the
BRIGHT control.
To make the image brighter: Turn the BRIGHT
control clockwise.
To make the image darker: Turn the BRIGHT control
counterclockwise.
Images on the
monitor Printouts
When “S.H:+(*)” is selected
Y
Y
When “S.H:–(*)” is selected
When “S.H:0” is selected
When “S:STD” is selected
from “SIDE” and “SCL:2.0”
is selected from “SCALE”
The length
is two times
longer than
the length
when
“SCL:1.0”
is selected.
When “S:STD” is selected
from “SIDE” and “SCL:1.0”
is selected from “SCALE”