Sony UP-895, Instructions For Use Manual

Page: 22 / 108

22
Preparation
Preparation
Connection
Notes
• Turn off the power to each device before making any
connections.
• Connect the AC power cord last.
Setting Up the Printer
You can set the printer to the desired specifications using
two kinds of switches.
• Slide switches on the paper tray inside the front door
You can easily set the printer specifications most
frequently used in daily operation, such as selection of
the paper type and printout quality.
• DIP switches on the rear panel
You can set the print mode and other settings you do
not need to change frequently
Setting the Slide Switches on the
Paper Tray
The factory settings are as follows.
Connection/Setting Up the Printer
RM-91 Remote control unit
(not supplied)
REMOTE
UP
DIP SW
VIDEO
AC IN
t
IN
T
OUT
DOWN
to REMOTE
Video equipment
to video output
connector
Supplied coaxial connecting
cable (BNC
y BNC)
to VIDEO IN
Color/black and
white video monitor
Connecting cable
(not supplied)
to VIDEO OUT
to video input
connector
to AC IN
Supplied AC
power cord
to wall outlet
1 2 3 4
HD HG S
SMOOTHING SHARPNESS GAMMA PAPER TYPE
OFF OFF ON
A
SHARPNESS switch
Adjusts the sharpness of the printout.
OFF: Not to emphasize an outline of the printout, set
the switch to this position.
I, II, III: To make a sharper outline, set the switch to
the proper position. In I, II and III order, the printout
becomes sharper.