22
Additional Information
No picture
No sound
Good picture
No sound
Dotted lines or
stripes
Double images or
“ghosts”
No color
Possible cause
Symptom
Solutions
Page
• The power cord,
antenna or VCR is not
connected.
• The TV is not turned
on.
• The volume level is too
low.
• The sound is muted.
• There is local
interference from cars,
neon signs, hair dryers,
power generators, etc.
• Broadcast signals are
reflected by nearby
mountains or
buildings.
• The antenna setup is
inappropriate.
• Use of a booster is
inappropriate.
• The color level setting
is too low.
• The color system
setting is
inappropriate.
• The antenna setup is
inappropriate.
• Check the power cord, antenna and VCR
connections.
• Press
?/1
(power).
• Press
!
(main power) on the TV to turn
off the TV for about five seconds, then
turn it on again.
• Press
2
+ to increase the volume level.
• Press
to cancel the muting.
• Do not use a hair dryer or other
equipment near the TV.
• Check the antenna setup. Contact a Sony
dealer for advice.
• Use a highly directional antenna.
• Use the “FINE TUNING” function.
• Check the antenna setup. Contact a Sony
dealer for advice.
• Turn off or disconnect the booster if it is in
use.
• Display the “PICTURE SETTING” menu
and select “PERSONAL” of “PICTURE
MODE”, then adjust the “COLOR” level.
• Display the “FUNCTIONS” menu and
check the “COLOR SYSTEM” setting
(usually set this to “AUTO”).
• Check the antenna setup. Contact a Sony
dealer for advice.
continued
19
9
8
9
9
–
–
–
16
–
–
14
18
–