21
Additional Information
Snowy picture
Noisy sound
Distorted picture
Noisy sound
Good picture
Noisy sound
Possible cause
Symptom
Solutions
Page
19
–
16
–
–
18
• Check the antenna cable and connection
on the TV, VCR and at the wall.
• Check the antenna setup.
Contact a Sony dealer for advice.
• Display the “PROGRAM PRESET” menu
and select “MANUAL PRESET” to preset
the channel again.
• Try using a booster.
• Turn off or disconnect the booster if it is in
use.
• Display the “FUNCTIONS” menu and
select the appropriate “TV SYSTEM”.
• The connection is loose
or the cable is
damaged.
• The antenna setup is
inappropriate.
• Channel presetting is
inappropriate or
incomplete.
• Signal transmission is
low.
• Broadcast signals are
too strong.
• The TV system setting
is inappropriate.
Troubleshooting guide
x
Troubleshooting
If you find any problem while viewing your TV, you can either use the Reset
function or check the Troubleshooting guide below. If the problem persists,
contact your Sony dealer.
Reset function
Press the RESET button on your remote control.
Your TV will go blank for a few seconds
then the picture will reappear.
Pressing RESET will set your TV to the factory
setting, but certain problems may be solved.
TV
RESET
RESET
continue
