Sony Trinitron KV-14FV1U Instruction Manual Download Page 2

2

 

Safety Information

 

Additional Safety Information

 

• If the unit is brought directly from a cold place to a warm place, moisture may condense on the video head drum. if this happens, the tape

may stick to the head drum and it may be damaged or the unit may not operate correctly. To avoid possible damage caused by moisture

condensation, be sure not to leave a cassette inside the compartment when the unit is not in use. When bringing the unit from a cold place

to a warm place, wait for about 10 minutes before operating it. If the tape operation buttons do not work due to moisture condensation,

leave the power on for more than one hour.

• Television programmes, films, video tapes and other materials maybe copyrighted. Unauthorised recording of such materials maybe

contrary to the provisions of the copyright laws.

 

Do not open the cabinet and the rear 
cover of the TV. Refer to qualified 
service personnel only.

To prevent fire or shock hazard, 
do not expose the TV to rain or 
moisture.

For your own safety, do not touch 
any part of the TV, power lead or 
aerial lead during lightning storms. 

Do not cover the ventilation 
openings of the TV For ventilation, 
leave a space of at least 10cm all 
around the set.

Never place the TV in hot, humid or 
excessively dusty places. Do not 
install the TV where it may be 
exposed to mechanical vibrations.

To prevent fire, keep inflammable 
objects or naked lights (eg candles) 
away from the TV.

Clean the TV with a soft, lightly 

dampened cloth. Do not use 

benzine, thinner or any other 

chemicals to clean the TV. Do not 

scratch the TV screen. As a safety 

precaution, unplug the TV before 

cleaning it.

Pull out the power lead by the 
plug. Do not pull on the power 
lead itself.

Take care not to place heavy 
objects on the power lead as this 
could result in damage.
We recommend you wind any 
excess lead around the holders 
provided on the rear of the TV.

Place the TV on a secure stable 
stand. Do not allow children to 
climb on to it. Do not place the TV 
on its side or face up.

Do not cover the ventilation 
openings of the TV with items 
such as curtains or newspapers 
etc.

Never push objects of any kind into 

the set as this could result in a fire or 

electric shock. Never spill liquid of 

any kind on the set. If any liquid or 

solid object does fall through, do not 

operate the TV. Have it checked 

immediately by qualified personnel. 

For environmental and safety 
reasons, it is recommended that the 
TV set is not left in standby mode 
when not in use. Disconnect from 
the mains.

This set is to operate on a 220-240V 

AC supply only. Take care not to 

connect too many appliances to the 

same power socket as this could 

result in fire or electric shock.

Unplug the power lead before 
moving the TV. Avoid uneven 
surfaces, quick steps or excessive 
force. If the set has been dropped or 
damaged, have it checked 
immediately by qualified service 
personnel.

 

Safety Information

 

•Notice for customers in the United Kingdom (see page 23 of this instruction manual). 

Summary of Contents for Trinitron KV-14FV1U

























Reviews: