Advanced Operation
Advanced Operation
25
Manual Programme
Preset menu
This menu allows you to tune in analogue channels, one by one.
Manual Programme Preset
This option displays the ‘Manual Programme Preset’ menu (See below).
With the ‘Manual Programme Preset’ option highlighted, press the
OK
button to
display the ‘Manual Programme Preset’ menu.
Detail Set Up
This option displays the ‘Detail Set Up’ menu (Refer to page 26).
With the ‘Detail Set Up’ option highlighted, press the
OK
button to display the
‘Detail Set Up’ menu.
Digital Set Up
This option displays the ‘Digital Set Up’ menu (Refer to page 27).
With the ‘Digital Set Up’ option highlighted, press the
OK
button to display the
‘Detail Set Up’ menu.
1.
With the ‘Manual Programme Preset’ option highlighted, press the
OK
button to display the ‘Manual Programme Preset’ menu.
2.
Press the
b
button to highlight the programme number. Press the
V
or
v
button to select the channel number you wish to manually tune (if tuning
a VCR, please select channel 0). Press the
B
button to highlight
‘Programme’.
3.
Press the
v
button to highlight ‘Channel’. Press the
b
button to highlight
the setting. You now need to tune the channel by one of the following
methods:
a) If you do not know the channel number (frequency):
Press the
V
or
v
button to search for the next available channel.
(When a channel has been found the search will stop, press the
V
or
v
button to continue searching.)
b) If you know the channel number (frequency):
Use the
Numbered
buttons to enter the channel number of the
broadcast you want or your VCR channel number.
Once you have stored a channel, press the
B
button to highlight
‘Channel’.
4.
Press the
v
button to highlight ‘Label’. This option allows you to assign a
name of your choice (up to 5 letters or number). The name is displayed
briefly on screen when the channel is selected.
Press the
b
button to highlight the setting. Press the
V
or
v
button until
the letter or number you require appears in the display (select ‘-’ for a
blank space). Press the
b
button to confirm. Repeat this until the name
is complete. Press the
B
button repeatedly to highlight ‘Label’.
5.
Press the
v
button to highlight ‘AFT’. Normally, fine tuning is performed
automatically, However, this option allows you to adjust it manually if you
feel that a slight tuning adjustment will improve the picture quality.
Press the
b
button to highlight the setting. Press the
V
or
v
button to
adjust the fine tuning over a range of -15 to +15, or select ‘On’ for
automatic fine tuning. Press the
B
button to highlight ‘AFT’.
6.
Press the
v
button to highlight ‘Skip’. This option allows you to skip
unused analogue channels when selecting channels with the
PROG +/-
buttons. (You can still select a skipped channel using the
Numbered
buttons on the remote control.)
Press the
b
button the setting. Press the
V
or
v
button to select ‘Yes’ or
‘No’. Press the
B
button to highlight ‘Skip’.
7.
Press the
v
button to highlight ‘Confirm’. Press the
OK
button to store any
changes.
The ‘Manual Programme Preset’ menu.
Manual Programme Preset
OK
Programme:
Channel:
Label:
AFT:
Skip
Confirm
01
C 41
-----
On
No
DX51 DL11U.book Page 25 Tuesday, May 24, 2005 9:44 AM
