23
Installing an Input Adaptor
Cha
p
te
r 2
P
repa
ra
ti
ons
Connections when the monitor is used by
switching between Quad View and 2K/HD
Zoom modes
To input the signals in 2K/HD Zoom mode, the monitor
output connectors on the input adaptors are used;
therefore, coaxial cables for connections among the input
adaptors are required, as well as those for connection
between the signal source and the monitor.
Use a coaxial cable less than 1 m (3.3 feet) long.
When the BKM-243HS or BKM-244CC is used
Input the signal to INPUT 1 on the input adaptor installed
in input blocks A to D, and input the same signal to be
output from MONITOR OUT to INPUT 2 on the input
adaptor installed in the same slot (slot 1 or slot 2) of
another input block.
To connect in Single-link
When four input adaptors are installed, you can select the
signal from four systems and when eight input adaptors are
installed, you can select from eight systems.
Note
A
B
OPTION 1
OPTION 1
OPTION 2
OPTION 2
INPUT 1
INPUT 2
MONITOR OUT
INPUT 1
INPUT 2
MONITOR OUT
INPUT 1
INPUT 2
MONITOR OUT
INPUT 1
INPUT 2
MONITOR OUT
C
D
OPTION 1
OPTION 1
OPTION 2
OPTION 2
INPUT 1
INPUT 2
MONITOR OUT
INPUT 1
INPUT 2
MONITOR OUT
INPUT 1
INPUT 2
MONITOR OUT
INPUT 1
INPUT 2
MONITOR OUT
Example when eight input adaptors are used
Input signal 1
Input signal 2
Input signal 3
Input signal 4
Input signal 7
Input signal 8
Input signal 5
Input signal 6
Summary of Contents for Trimaster SRM-L560
Page 136: ...Sony Corporation ...
