50
GB
On safety
Should any solid object or liquid fall into the cabinet,
unplug the amplifier and have it checked by qualified
personnel before operating it any further.
On power sources
• Before operating the unit, check that the operating
voltage is identical with your local power supply.
The operating voltage is indicated on the nameplate
at the rear of the amplifier.
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the unit itself has been turned off.
• If you are not going to use the amplifier for a long
time, be sure to disconnect the amplifier from the
wall outlet. To disconnect the AC power cord, grasp
the plug itself; never pull the cord.
• (Models of area code U, CA only)
One blade of the plug is wider than the other for the
purpose of safety and will fit into the wall outlet only
one way. If you are unable to insert the plug fully into
the outlet, contact your dealer.
• AC power cord must be changed only at the qualified
service shop.
On heat buildup
Although the unit heats up during operation, this is not
a malfunction. If you continuously use this unit at a
large volume, the cabinet temperature of the top, side
and bottom rises considerably. To avoid burning
yourself, do not touch the cabinet.
On placement
• Place the amplifier in a location with adequate
ventilation to prevent heat buildup and prolong the
life of the amplifier.
• Do not place the amplifier near heat sources, or in a
place subject to direct sunlight, excessive dust or
mechanical shock.
• Do not place anything on top of the cabinet that
might block the ventilation holes and cause
malfunctions.
• Do not place the amplifier near equipment such as a
television, video deck or cassette deck. (If the
amplifier is being used in combination with a
television, video deck or cassette deck and is placed
too close to that equipment, noise may result, and
picture quality may suffer. This is especially likely
when using an indoor antenna. Therefore, we
recommend using an outdoor antenna.)
On operation
Before connecting other components, be sure to turn
off and unplug the amplifier.
On cleaning
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
If you have any question or problem concerning your
amplifier, please consult your nearest Sony dealer.
Additional Information
Precautions
Summary of Contents for TA-DA9000ES
Page 55: ...Additional Information 55GB ...
Page 59: ......
Page 60: ...Sony Corporation Printed in Japan Printed on 100 recycled paper ...
