Sony TA-DA9000ES, Operating Instructions Manual

Page: 46 / 60

46
GB
• Before setting the surround speakers, select the
surround speaker system you use.
Before you begin, make sure you have
connected all components properly.
Recording on an audio tape or
MiniDisc
You can record on a MiniDisc or cassette tape
using the amplifier. See the operating
instructions of your cassette deck or MD deck if
you need help.
1
Select the component to be recorded.
2
Prepare the component for playing.
For example, insert a CD into the CD
player.
3
Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
4
Press REC OUT SE/–
repeatedly to select the input
(component for playing).
REC OUT SE/– are for analog
output only. Digital output is available for
SOURCE (current input) only. You can not
select “i.LINK”.
5
Start recording on the recording deck,
then start playback on the playback
component.
Notes
• You cannot record a digital audio signal using a
component connected to the analog TAPE OUT or
MD/DAT OUT jacks. To record a digital audio
signal, connect a digital component to the MD/DAT
OPTICAL OUT jacks.
• Sound adjustments do not affect the signal output
from the TAPE OUT or MD/DAT OUT jacks.
• The signals input to the MULTI CHANNEL INPUT
jacks are not output from the TAPE OUT or MD/
DAT OUT jacks even when MULTI CH IN is being
used. The analog audio signals of the current or
previously used input are output.
• When “OFF” is selected with REC OUT
SE/–, no sound is output from TAPE
OUT or MD/DAT OUT jacks.
Recording