background image

2

Owner’s Record

The model and serial numbers are located on the rear of the
SX-M700A and on the bottom of the SX-C700A/C750/
D700A/D750/P700. Record the serial numbers in the spaces
provided below.  Refer to them whenever you call upon your
Sony dealer regarding these products.

Model No. SX-M700A

Serial No.______________

Model No. SX-C700A/C750

Serial No.______________

Model No. SX-D700A/D750

Serial No.______________

Model No. SX-P700

Serial No.______________

For the customers in Canada
This Class A digital apparatus complies with Canadian
ICES-003.

This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

This symbol is intended to alert the user to
the presence of uninsulated  “dangerous
voltage” within the product’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock to
persons.

WARNING

This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules.  These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment.  This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.

You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.

The shielded interface cable recommended in this manual
must be used with this equipment in order to comply with the
limits for a digital device pursuant to Subpart B of Part 15 of
FCC Rules.

WARNING

To prevent fire or shock hazard, do not
expose the unit to rain or moisture.

For the customers in the U.S.A.

Summary of Contents for SX-C700A

























Reviews: