background image

17

The figure below shows an connection example.

to AC power source

AC IN

DELEGATE’S/CHAIRMAN’S
UNIT

 a)

Cable with 20-pin
multi-connector

 c)

to output
connector

 a)

SX-C700A

 d)

SX-D700A

 d)

 (Up to 15 units of SX-C700A and

SX-D700A can be connected to one line.)

INTERPRETER’S
UNIT

 a)

CONTROL UNIT/
INTERPRETER’S
UNIT

 a)

RK-1700/1705
connecting cable
(10 m/5 m)
(not supplied)

 b)

MAIN

Main headphones

Microphones

MIC IN

Sub-headphones

SUB

SX-P700

a) For details of connecting cables, see “How to connect cables” shown below.
b) You can extend the distance between units up to 60 meters by using the RK-1710/1713 connecting cable

between the RK-1700/1705 connecting cable and the interpreter’s unit. Note, however, that the maximum
length must not exceed 60 meters (196.8 feet).

c) You can extend the distance between units by using the RK-1710/1713 connecting cable (not supplied).
d) The desk-mounted SX-C750/D750 can also be used in this system. Up to 15 desk-mounted SX-C750 and

SX-D750 units can be connected to one line.
The specially designed cables are used to connect these units to the system.
For details, contact your Sony dealer.

AC power cord
(supplied with SX-M700A)

RK-1700/1705
connecting cable (10 m/
5 m) (not supplied)

 b)

How to connect cables of SX-C700A/D700A

The figure below shows how to connect and
disconnect the 20-pin multi-connectors of the
chairman’s/delegate’s unit, RK-1700/1705 and RK-
1710/1713 connecting cables.

When connecting

With the white mark on the 20-pin
multi-connector facing up, push
the connector home until it clicks.

When disconnecting

Grasp the knurled part of
the connector and pull it
towards you.

When connecting

Meet the white marks on each
connector and push the connectors
each other until they click.

When disconnecting

Grasp the knurled part
of the connector and
pull it towards you.

White mark

White mark

SX-M700A

Summary of Contents for SX-C700A

























Reviews: