24
Setting the Camera
Outputs
You can specify video signals directly output from the camera,
with menu operations.
Notes
• The MAIN (camera picture), RET (return video), or VF (the
same picture as that displayed on the viewfinder screen)
setting is common to SD-SDI and VBS. Different signals
cannot be output.
• The camera image that is output in standalone mode is a
temporary HD image for checking operation.
The menu pages used for the output settings have been
registered to the USER menu at the factory.
• <SYSTEM FORMAT>
• <TEST OUT>
• <SDI OUT>
Set the following menu items to the settings shown in the
table.
For details about menu operations and the USER menu, see
“Menu Operations” on page 27.
Outputting the signal being shot (camera
picture)
The same textual information as that displayed on the
viewfinder screen can be added to the output signal by setting
CHARACTER to “ON” on the <SDI OUT> or <TEST OUT>
page.
To output as HD-SDI
To output as SD-SDI
To output as VBS
Constantly outputting a return video
• When a camera control unit is connected, one of the signals
being supplied to the camera control unit can be output from
the camera.
• The last selected return signal is output.
• The same textual information as that displayed on the
viewfinder screen can be added to the output signal by
setting CHARACTER to “ON” on the <SDI OUT> or <TEST
OUT> page.
To output as HD-SDI
To output as SD-SDI
To output as VBS
Outputting the same image as that on the
viewfinder screen
• With HD-SDI, you can obtain a signal that includes the same
information as that being displayed on the viewfinder screen
according to the settings of the VF MARKER,
CHARACTER, VF DETAIL, ZEBRA, etc. The ON/OFF or
other settings for adding information are common to those
for the viewfinder. The output is synchronized with switching
among Y, R, G, and B or switching to a return signal.
• With SD-SDI or VBS, the output is synchronized only with
switching between a return signal and the camera image. It
does not correspond to switching among Y, R, G, and B.
Information other than CHARACTER (such as VF
MARKER, VF DETAIL, ZEBRA) cannot be added to the
output.
Note
With the settings for outputting the same image as that on the
viewfinder screen, the output will be obtained in 1080i, even if
the format setting is 720P.
To output as HD-SDI
To output as SD-SDI
Menu page
Page No.
Item
Setting
<SDI OUT>
M11
SDI-MONI OUT
MAIN
Menu page
Page No.
Item
Setting
<SDI OUT>
M11
SDI-MONI OUT
SD-SDI
DOWN CONVERTER
SELECT
MAIN
Menu page
Page No.
Item
Setting
<TEST OUT>
M10
OUTPUT
VBS
DOWN CONVERTER
SELECT
MAIN
Menu page
Page No.
Item
Setting
<SDI OUT>
M11
SDI-MONI OUT
RET
Menu page
Page No.
Item
Setting
<SDI OUT>
M11
SDI-MONI OUT
SD-SDI
DOWN CONVERTER
SELECT
RET
Menu page
Page No.
Item
Setting
<TEST OUT>
M10
OUTPUT
VBS
DOWN CONVERTER
SELECT
RET
Menu page
Page No.
Item
Setting
<SDI OUT>
M11
SDI-MONI OUT
VF
Menu page
Page No.
Item
Setting
<SDI OUT>
M11
SDI-MONI OUT
SD-SDI
DOWN CONVERTER
SELECT
VF
