16
4
Adjust the front-rear position so that the camera
handle does not interfere when you rotate the
BKW-401 arm upwards.
Attaching the Cable Clamp Belt
(Supplied)
You can secure the optical/electrical multi cable, connected to
the BPU connector, to the side of the camera by attaching the
supplied cable clamp belt.
1
Insert the belt bracket into hole
A
or
B
of the cable
clamp belt.
2
Remove two +B3×5 screws and a hidden screw
shown in the figure below from the camera.
3
Secure the cable clamp belt to the camera, using the
two suB3×8 screws.
4
1
Release the buckle,
2
bundle the cable with the
belt,
3
then lock the buckle again.
5
Adjust the length by pulling down the end of the belt.
D
Not interfering with handle
A
B
Belt bracket
Screws (+B3×5)
Hidden screw
Screws (+B3×8)
1
2
3
Optical/electrical
multi cable