13
Note
To 12 V power, contact a Sony sales representative
or Sony service representative.
Preparations
Attaching a Lens
For information on handling lenses, refer to the lens’ operation
manual.
Attachment procedure
1
Push the lens fixing lever upwards and remove the
lens mount cap from the lens mount.
2
Align the lens’ alignment pin with the notch in the
upper part of the lens mount and insert the lens into
the mount.
3
While supporting the lens, push the lens fixing lever
downwards to secure the lens.
4
Connect the lens cable to the LENS connector.
5
Secure the lens cable with the cable clamp.
Adjusting the Flange Focal Length
Adjustment of the flange focal length (the distance between
the lens mount attachment plane and the imaging plane) is
necessary in the following situations:
• The first time a lens is attached
• When changing lenses
• If the focus is not sharp at both telephoto and wide angle
when zooming
The flange focal length can be more precisely adjusted by
using the focus assist indicators.
For details about focus assist indicators, see “Displaying the
focus assist indicators” on page 22.
1,3
4
2
5
