manualshive.com logo in svg

Sony STR-ZA810ES, Service Manual

Share
Download
Sony STR-ZA810ES Service Manual Download Page 30

STR-DN1080/ZA810ES

30

2-25.  MAIN  BOARD  SERVICE  POSITION (Check the SIDE A removing the back panel)

2-26.  MAIN  BOARD  SERVICE  POSITION (Check the SIDE B without removing the back panel)

alligator clip

alligator clip

DCDC board

MB-1613 board

MAIN board

front side

front panel block

Clamp to the 
chassis.

Clamp to the GND plate.

Clamp to the GND plate.

Clamp to the HDMI connector (CN5000).
(“GAME” port)

GND BRACKET board

top side

bottom side

STANDBY board

power transformer

(DN1080)

(ZA810ES)

STANDBY 
board

front side

rear side

bottom side

back panel

Note 1:

 If removing the power cord from the back panel is difficult, 

 

  prepare a new power cord and connect it to the STANDBY 

 

  board. Refer to page 85 or page 95 for the Part No. of the 

  

power 

cord.

STANDBY 
board

front side

rear side

bottom side

back panel

alligator clip

alligator clip

(STR-DN1080)

(STR-ZA810ES)

Clamp to the back panel.

Clamp to the back panel.

Clamp to 
the chassis.

Clamp to 
the chassis.

Note 2:

 Remove the AC inlet from the back panel and then 

 

  directly reconnect it to the STANDBY board.

MAIN board

MAIN board

SYS SET

2020/11/17 21:24:35 (GMT+09:00)

Summary of Contents for STR-ZA810ES



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands