15
GB
Hooking Up and Setting Up the Speaker System
Multi Channel Surround Setup
For the best possible surround sound all speakers should
be the same distance from the listening position (
A
).
(However, this unit lets you to place the center speaker up
to 1.5 meters (5 feet) closer (
B
) and the surround speakers
up to 4.5 meters (15 feet) closer (
C
) to the listening
position.
The front speakers can be placed from 1.0 to 12.0 meters (3
to 40 feet) from the listening position (
A
).)
You can place the surround speakers either behind you or
to the side, depending on the shape of your room (etc.).
Note
Do not place the center speaker farther away from the listening
position than the front speakers.
When the surround speakers are placed to the side
When the surround speakers are placed behind you
45
°
90
°
20
°
A
A
B
C
C
45
°
90
°
20
°
A
A
B
C
C
Settings
SMALL
SMALL
SMALL
YES
Specifying the speaker parameters
1
Press
?
/
1
to turn on the receiver.
2
Press SET UP.
3
Press MENU
/
to select the parameter you
want to adjust.
4
Press MENU +/– to select the setting you want.
The setting is stored automatically.
5
Repeat steps 3 and 4 until you have set all of the
parameters that follow.
z
Normal speaker and Micro Satellite speaker
Choose NORM. SP. if you’re using normal speakers and MICRO
SP. if you’re using Micro Satellite speakers. If you choose NORM.
SP., you can adjust the speaker size and the sub woofer selection
as mentioned below. However, if you choose MICRO SP., the
speaker size and the sub woofer selection has been configurated
as follows:
Speakers
Front
Center
Surround
Woofer
You cannot change the configuration if you choose MICRO SP.
The setting for Micro Satellite speaker (MICRO SP.) has been
programmed to optimize the sound balance. If you use Sony’s
Micro Satellite speakers, select MICRO SP. When you use Micro
Satellite speaker and the speaker size is set to LARGE, you may
not obtain the correct soundstage. The speaker may also be
damaged at high volume position.
