Sony SRS-X11 Page 84 Help Manual Download

Page: 84 / 98

Personal Audio System

SRS-X11

Notes on charging

Caution

When the speaker detects a problem for the following causes while charging the battery, it will stop charging even if

charging is not completed. If this state continues for a long time, the CHARGE indicator flashes quickly in orange.

Ambient temperature exceeds the range of 5 °C – 35 °C (41 °F – 95 °F).

There is a problem with the battery.

Note

Charging time varies depending on battery usage conditions.

Charge the speaker in an ambient temperature of between 5 °C and 35 °C (41 °F and 95 °F).

The speaker becomes warm during charging. This is not a malfunction.

If the speaker is not used for a long time, it may take longer to charge the battery.

Avoid exposure to rapid temperature change, direct sunlight, moisture, sand, dust, or mechanical shock. Also, never

leave the speaker in a car parked in the sun.

4-568-649-11(1)

Help Guide

How to Use

Summary of Contents for SRS-X11



















































































Search results

Summary of Contents for SRS-X11

Reviews:

Related manuals for SRS-X11

Brands by name

Popular brands

Sony SRS-X11, Help Manual

Search results

Summary of Contents for SRS-X11

Reviews:

Related manuals for SRS-X11

Brands by name

Popular brands