![background image](http://html.mh-extra.com/html/sony/srs-x11/srs-x11_help-manual_1330212071.webp)
8. Start playback on the BLUETOOTH device, and adjust the volume to moderate level.
9. Press the VOL (volume) –/+ buttons on one of the speakers to adjust the volume.
Volume adjustment of one speaker is reflected on the other.
Hint
When making or receiving a call, only operate the speaker where the
(BLUETOOTH) indicator is lit.
If a portable audio device, etc. is connected to the AUDIO IN jack, the speaker automatically switches to AUDIO IN
mode, and the speaker add function is terminated.
If any other BLUETOOTH device(s), such as a BLUETOOTH mouse or BLUETOOTH keyboard, is connected to the
BLUETOOTH device that is connecting with the speaker, there may be distorted sound or noise in the speaker output.
In this case, terminate the BLUETOOTH connection between the BLUETOOTH device and other BLUETOOTH
device(s).
To terminate the speaker add function while in use, press and hold the ADD button.
When the speaker, that had been used as the speaker add function the last time, is turned on, the speaker will try to
establish the speaker add function with the other speaker that had been connected. If you want to use two SRS-X11
speakers as the speaker add function again, turn the other speaker on within a minute, otherwise the speaker will
terminate the automatic connection as the speaker add function.
If you want to use the speaker that had been used as one of the speakers of the speaker add function by itself, press
the
(power)
PAIRING button to turn on the speaker, then press and hold the ADD button until a beep is heard
to terminate the speaker add function since the speaker tries to establish the last-made connection.
Note
If you reset or initialize one of the two speakers while using the speaker add function, make sure to turn off the other
speaker. If you do not turn off the other speaker before restarting the speaker add function, there may be problems in
making a BLUETOOTH connection and outputting sound.
Related Topic
Pairing and connecting with a BLUETOOTH device
Connecting with an NFC-compatible device by one touch (NFC)
Unable to connect a BLUETOOTH device with the speaker in the speaker add function
67