The speaker may not be connected with a BLUETOOTH mobile phone with HFP or HSP. Check the connection
status on the BLUETOOTH mobile phone.
Switch the call device to the speaker by pressing and holding the
(call) button for about two seconds.
3. Adjust the volume by pressing the VOL (volume) –/+ buttons on the speaker or operating the BLUETOOTH mobile
phone.
4. To end a call, press the
(call) button.
If you were listening to music before the call, playback will resume when the call ends.
If you end a call by operating the BLUETOOTH mobile phone, playback will also resume when the call ends if you
were listening to music before the call.
Hint
The volume of music playback and calling is set independently in the speaker.
If the caller cannot hear or can barely hear your voice, talk more directly into the microphone of the speaker.
Note
When using the speaker add function, sound of the phone call is output from only the speaker where the
(BLUETOOTH) indicator is lit.
Depending on the BLUETOOTH mobile phone, playback may not pause when making a call.
Use a BLUETOOTH mobile phone at least 50 cm away from the speaker. Noise may result if the speaker and the
BLUETOOTH mobile phone are too close.
When an audio cable is connected to the AUDIO IN jack of the speaker, you cannot listen to music of the
BLUETOOTH device. However, when the BLUETOOTH connection is active, the hands-free function is available.
Related Topic
How to make a wireless connection with BLUETOOTH devices
Terminating the BLUETOOTH connection (After use)
Button functions for a phone call
4-568-649-11(1)
Copyright 2015 Sony Corporation
74
