Sony SRMASTER SR-R4 Operation Manual Download Page 16

Page: 16 / 85

Mount Control Panel on Unit

Cha

pte

r 2

rep

ion

Use the supplied control panel cable to
connect the unit and the control panel.

Use the cable clamp as shown, to fix the
cable.

Notes

• Do not cross the cord below the clamps.
• Make sure that the bottom of the cord does not

extend beyond the bottom of the SR-R4.

• If the SR-R4 cannot be docked on the F65, refer

to the above and check the cord bundle again.

Note

Always turn off the power supply for the unit before
disconnecting the control panel cable and removing the
control panel.

To remove the control panel

Grasp the underside of the CP bracket and push it
in the

direction to release the lock. Then slide

the control panel out.

Summary of Contents for SRMASTER SR-R4






















































































Search results

Summary of Contents for SRMASTER SR-R4

Reviews:

Related manuals for SRMASTER SR-R4

Brands by name

Popular brands

Sony SRMASTER SR-R4, Operation Manual

Search results

Summary of Contents for SRMASTER SR-R4

Reviews:

Related manuals for SRMASTER SR-R4

Brands by name

Popular brands