Sony SPP-A985 - Cordless Telephone With Answering System Operating Instructions Manual Download

Page: 50 / 80

Answering Machine Features

Setting the audible message alert

You have the option of having a beep tell you if you have received any
new incoming messages.

Press

(MENU)

repeatedly until

you hear “Set audible message
alert”.
“- -” blinks on the display.

Press

(SELECT)

to set the

audible message alert on or off.

Press

(TIME/SET)

The setting is announced.

Press

(PLAY/STOP)

to exit the

menu setup mode.

Notes

• When the audible message alert is turned on, you will hear a beep every 10

seconds if there are any new messages.

• To stop the beep, press any button related to the answering machine

function.

• The audible message alert is preset to off.

Setting up the answering machine (continued)

(VOL)

(TIME/SET)

(PLAY/STOP)

Summary of Contents for SPP-A985 - Cordless Telephone With Answering System

















































































Search results

Summary of Contents for SPP-A985 - Cordless Telephone With Answering System

Reviews:

Related manuals for SPP-A985 - Cordless Telephone With Answering System

Brands by name

Popular brands

Sony SPP-A985 - Cordless Telephone With Answering System, Operating Instructions Manual

Search results

Summary of Contents for SPP-A985 - Cordless Telephone With Answering System

Reviews:

Related manuals for SPP-A985 - Cordless Telephone With Answering System

Brands by name

Popular brands