Sony SPP-A985 - Cordless Telephone With Answering System Operating Instructions Manual Download

Page: 41 / 80

Telephone Features

Telephone Features

To switch from the base phone to the handset

Press

(HOLD)

on the base

phone.

The call is on hold and “HOLD”
appears on the display and the
SPEAKERPHONE lamp on the
base phone flashes.

Press

(TALK)

(HOLD)

on the

handset.

You can continue talking to the
caller through the handset.

To switch from the handset to the base phone

Press

(HOLD)

on the handset.

The call is on hold and “HOLD”
appears on the display and the
LINE lamp on the base phone
flashes.

Press

(SPEAKERPHONE)

(HOLD)

on the base phone.

You can continue talking to the
caller through the
speakerphone.

Tips

• While talking through the speakerphone on the base phone, if you pick up

the handset, the call will be switched to the handset.

• When the call is put on hold on the base phone, if you pick up the handset,

the call will be switched to the handset.

Switching the phones during a call

You can easily switch between the handset and speakerphone on the
base phone without disconnecting the call.

(TALK)

SPEAKERPHONE
lamp

(SPEAKERPHONE)

LINE lamp

Summary of Contents for SPP-A985 - Cordless Telephone With Answering System

















































































Search results

Summary of Contents for SPP-A985 - Cordless Telephone With Answering System

Reviews:

Related manuals for SPP-A985 - Cordless Telephone With Answering System

Brands by name

Popular brands

Sony SPP-A985 - Cordless Telephone With Answering System, Operating Instructions Manual

Search results

Summary of Contents for SPP-A985 - Cordless Telephone With Answering System

Reviews:

Related manuals for SPP-A985 - Cordless Telephone With Answering System

Brands by name

Popular brands