Ad
minis
tra
ting t
he Camer
a
Configuring the Network — Network Menu
24
The IP address, subnet mask, default gateway are
assigned automatically. To obtain DNS server
addresses automatically, select
Obtain DNS server
address automatically
. To set manually, deselect
Obtain DNS server address automatically
, and
type the address in the
Primary DNS server
and
Secondary DNS server
boxes.
Note
When you select
Obtain an IP address
automatically (DHCP)
, make sure that a DHCP
server is operating on the network.
To specify the IP address manually
Deselect
Obtain an IP address automatically
(DHCP)
. Type the address in the
IP address
,
Subnet mask
,
Default gateway
,
Primary DNS
server
and
Secondary DNS server
boxes.
Host
name
and
Domain suffix
are not available.
MTU
Enter the MTU value for the Ethernet port. (1280 -
1500)
Common setting
Host name
Type the host name of the camera to be transmitted
to the DHCP server. This setting is valid only when
Obtain an IP address automatically (DHCP)
is
selected.
Domain suffix
Type the domain suffix of the camera to be
transmitted to the DHCP server. This setting is valid
only when
Obtain an IP address automatically
(DHCP)
is selected.
Note
The domain suffix is sent to the DHCP server as
FQDN (Fully Qualified Domain Name)
information when
Host name
is set.
HTTP port number
Normally select
80
. If you want to use a port
number other than 80, select the text box and type a
port number between 1024 and 65534.
Note
When you have set the
HTTP port numbe
r to a
number other than 80 in the Network menu or in
SNC toolbox, access the camera again by typing the
IP address of the camera on your Web browser as
follows:
Example: Setting port number 8000 when IP
address is 192.168.0.100
OK/Cancel
Summary of Contents for SNC-VB600B
Page 39: ...Sony Corporation ...
