76
en | Configuration
Network camera
2019-07 | V01 | DOC
User manual
Sony Corporation
3.
Check the
enabled
box to activate the mask.
4.
Use the mouse to move the mask; drag the corner points to resize.
5.
Click
Set
.
6.
To remove a mask, select it and click the waste bin icon.
Note:
To add an additional adjustment point to the area, double-click on a side.
Click
Set
to apply the changes.
4.3.12
Exposure priority
(Only applicable to SNC-HMX cameras)
Exposure priority is used to increase or decrease the priority of a specific area when
determining the overall exposure for the image. Eight regions can be defined.
1.
Select the region you wish to define in the drop-down box.
2.
Select
Low
,
High
or
Off
in the drop-down box for the region you have selected.
–
Low
reduces the priority
–
High
increases the priority
–
Off
uses normal priority
3.
Use the mouse to define the area for each of the regions.
–
Drag the corner points or sides,
–
Double-click on a side to add one additional point to the polygon.
4.
Click
Set
.
5.
To remove a region, select it and click the waste bin icon.
Click
Set
to apply the changes.
4.3.13
Audio
(Only available for cameras with audio functions)
You can set the gain of the audio signals to suit your specific requirements. The live video
image is shown in the window to help you check the audio source. Your changes are effective
immediately.
If you connect via Web browser, you must activate the audio transmission on the
'Live'
functions
page. For other connections, the transmission depends on the audio settings of the
respective system.
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data is encoded according to the selected format and requires
additional bandwidth. If you do not want any audio data to be transmitted, select
Off
.
Audio
Enable or disable the audio recording option.
Audio input
(Only applicable to SNC-EMX30, EMX30R, EMX50, and EMX50R)
Select the audio input from the drop-down list.
Microphone volume
(Only applicable to SNC-EMX30, EMX30R, EMX50, and EMX50R)
Adjust the audio level with the slider(s). Adjust so that the indicator does not go into the red
zone.
Line Out
(Only applicable to SNC-EMX cameras)
Adjust the audio level with the slider(s). Adjust so that the indicator does not go into the red
zone.
Summary of Contents for SNC-EMX30
Page 274: ......
Page 275: ... Bosch Security Systems B V 2019 2019 07 V01 ...
