A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Camera — Camera setting Page
18
Shutter
Select the shutter speed of the electronic shutter. You can
select one of 16 levels from
1/7.5
to
1/10000
. In the
factory, it is set to
1/7.5
.
Gain
Select and display the value of the camera AGC (Auto
Gain Control). You can select and display one of 19
levels from
0
to
36
dB.
Your setting will be temporary, because an optimum
level is selected to suit the brightness of the object.
TvStandard
Select the video format of the output video signal from
NTSC
and
PAL
.
When this setting is changed, the camera system
automatically restarts. Internet Explorer must be read
again because the communication line of the computer
is interrupted.
Mount
Select an installation form of the camera from
Ceiling
and
Desktop
. When
Ceiling
is selected, the image from
the analog video output and the image sent to the
computer are turned around.
Note
In this viewer, the image may be turned around in the
display when the viewer is started up with
Mount
of
Camera section set to
Desktop
. This image is not
corrected if you set it to be turned around in
Mount
setting.
When you use the camera with
Desktop
installation, we
recommend using the viewer
ActiveX viewer
.
Camera save
Save the setting contents for the camera in the flash
memory inside the camera.
Camera reset
Reset the setting contents for the camera to return them
to the factory settings.
Temperature setting section
Temperature
The value of the temperature sensor on the basal plate
inside the camera is displayed. The built-in fan is turned
on or off based on this value.
UpperLimitAlert
This value is for internal temperature control.
Do not change it.
UpperLimit Conditioner
This value is for internal temperature control.
Do not change it.
UpperLimitFan
This value is for internal temperature control.
Do not change it.
ModerateTemperature
This value is for internal temperature control.
Do not change it.
LowerLimitFan
This value is for internal temperature control.
Do not change it.
LowerLimit Conditioner
This value is for internal temperature control.
Do not change it.
LowerLimitAlert
This value is for internal temperature control.
Do not change it.
OK/Cancel
