Chapter 3 Using the Subsystem
25
1
Press the POWER switch located on the left
side of the front panel.
This turns on the subsystem and causes the
POWER indicator to light up.
2
Start up the host computer. Refer to the
manual supplied with the host computer for
the start up procedure.
3
Insert a disk cartridge with the side you want
to use facing upwards.
Chapter 3 Using the Subsystem
Inserting a Disk Cartridge
4
Access or write data on the disk using
software commands on the host computer.
The BUSY indicator lights up while the unit
is accessing the disk.
■
What to do if the subsystem stops
operating
When the temperature in the subsystem exceeds
the preset level, the BUSY indicator starts
flashing on and off at about 2-second intervals,
regardless of whether or not a disk is being
accessed, and the subsystem stops operating.
If this happens, you should improve the
ventilation of a setting area.
If the subsystem still refuses to operate, unplug
the unit and contact your dealer.
To use Side A, insert the
disk with “A” facing
upward.
Press th POWER
switch
