Sony SLV-SE70NP1, SLV-SE70NP2, SLV- Operating Instructions Manual Download

Page: 67 / 84

Additional Operations

Searching using
the index
function

The VCR marks the tape with an index
signal at the point where each recording
begins. Use these signals as references to
find a specific recording.

INDEX
SEARCH

Insert an indexed tape into the VCR.

Press

INDEX SEARCH.

• To search ahead, press

INDEX SEARCH.

• To search backwards, press

INDEX SEARCH.

The VCR starts searching, and playback
starts automatically from that point.

To stop searching

Press

STOP.

Note

• No index signal will be added when recording starts from recording pause.

However, an index signal will be marked if you change the programme position
during recording pause.

INDEX

Summary of Contents for SLV-SE70NP1, SLV-SE70NP2, SLV-





















































































Search results

Summary of Contents for SLV-SE70NP1, SLV-SE70NP2, SLV-

Reviews:

Related manuals for SLV-SE70NP1, SLV-SE70NP2, SLV-

Brands by name

Popular brands

Sony SLV-SE70NP1, SLV-SE70NP2, SLV-, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE70NP1, SLV-SE70NP2, SLV-

Reviews:

Related manuals for SLV-SE70NP1, SLV-SE70NP2, SLV-

Brands by name

Popular brands