Sony SLV-SE70NP1, SLV-SE70NP2, SLV- Operating Instructions Manual Download

Page: 58 / 84

Additional Operations

To resume normal playback

Press

PLAY.

Tip

• Adjust the picture using the TR/– buttons if:

– Streaks appear while playing in slow motion.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.

To set tracking to the centre position, press both buttons (+/–) at the same time.

Notes

• The sound is muted during these operations.
• In the LP mode, noise may appear or there may be no colour.

Playing/searching at various speeds (continued)

Playback options

Play at twice the normal
speed

Play in slow motion

Play frame by frame

Rewind and start play

Operation

During playback, press

SLOW.

During pause, press

FF or

REW on the remote

commander. Hold down

FF or

REW to play one

frame each second.

During stop, press

PLAY on the VCR while holding down

REW on the VCR.

Summary of Contents for SLV-SE70NP1, SLV-SE70NP2, SLV-





















































































Search results

Summary of Contents for SLV-SE70NP1, SLV-SE70NP2, SLV-

Reviews:

Related manuals for SLV-SE70NP1, SLV-SE70NP2, SLV-

Brands by name

Popular brands

Sony SLV-SE70NP1, SLV-SE70NP2, SLV-, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE70NP1, SLV-SE70NP2, SLV-

Reviews:

Related manuals for SLV-SE70NP1, SLV-SE70NP2, SLV-

Brands by name

Popular brands