background image

7

Getting Started

Getting Started

Notes

• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove

the batteries to avoid possible damage from battery leakage.

• Do not use a new battery with an old one together.
• Do not use different types of batteries together.

Controlling other TVs with the remote commander

The remote commander is preprogrammed to control non-Sony TVs.  If your
TV is listed in the table below, set the appropriate manufacturer’s code
number.

1

Set  TV / VIDEO  at the top of the remote commander to  TV .

2

Hold down ON/STANDBY, and enter your TV’s code number(s) using
the programme number buttons.  Then release ON/STANDBY.
Now you can use the following TV control buttons to control your TV:
ON/STANDBY, TV/VIDEO, programme number buttons, 

?

 (ten’s

digit), PROG +/–, VOL +/–, 

;

 (TV), 

V

 (Teletext), FASTEXT buttons,

WIDE*, MENU*, and the joystick (

>

/

.

/

?

/

/

, OK)*.

* These buttons may not work with all TVs.

Tip

• When you set your TV’s code number correctly while the TV is turned on, the TV

turns off automatically.

continued

To

Select the sound

Use FASTEXT

Call up on-screen display

Change the Teletext page

Operate TV menu options

Switch to/from wide mode of a Sony wide TV (For
other manufacture’s wide TV, see “Controlling other
TVs with the remote commander” below.)

Press

AUDIO MONITOR

FASTEXT buttons

DISPLAY

/

MENU
Joystick (

>

/

.

/

?

/

/

, OK)

WIDE

Summary of Contents for SLV-E780EG









































































Reviews: