Getting Started
7
Getting Started
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
Controlling other TVs with the remote commander
The remote commander is preprogrammed to control non-Sony TVs. If your
TV is listed in the table below, set the appropriate manufacturer’s code
number.
1
Set
[TV]
/
[VIDEO]
at the top of the remote commander to
[TV]
.
2
Hold down ON/STANDBY, and enter your TV’s code number(s) using
the programme number buttons. Then release ON/STANDBY.
Now you can use the following TV control buttons to control your TV:
ON/STANDBY, TV/VIDEO, programme number buttons, PROG +/–,
VOL +/–,
;
(TV),
V
(Teletext), FASTEXT buttons, WIDE, MENU,
>
/
.
/
?
/
/
and OK with some TV.
Tip
• If you set your TV’s code number correctly while the TV is turned on, the TV turns
off automatically.
continued
Summary of Contents for SLV-E295UX
Page 67: ...66 Additional Information ...
Page 68: ...67 Additional Information ...