Basic Operations
Basic Operations
43
To use the VCR before a timer recording begins, just press ON/STANDBY.
The
indicator turns off and the VCR switches on. Remember to press
ON/STANDBY to reset the VCR after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter.
• Display tape information on the TV screen.
• Check the timer settings.
• Watch another TV programme.
Daily/weekly recording
In step 2 above, press
.
to select the recording pattern. Each time you press
.
, the indication changes as shown below. Press
>
to change the indication
in reverse order.
TODAY
n
SU-SA (Sunday to Saturday)
n
MO-SA (Monday to Saturday)
n
MO-FR (Monday to Friday)
n
SA (every Saturday) .....
n
MO (every Monday)
n
SU (every Sunday)
n
1 month later
n
(dates
count down)
n
TODAY
Timer recording with VPS/PDC signals
The broadcast systems transmit VPS (Video Programme System) or PDC
(Programme Delivery Control) signals with their TV programmes. These
signals ensure that your timer recordings are made regardless of broadcast
delay, early starts or broadcast interruptions.
To use the VPS/PDC function, set VPS/PDC to ON. You can also use the
VPS/PDC function for a source connected to the LINE-1(TV), LINE-3 IN
connectors, and LINE-2 IN jacks.
Tips
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a progamme in the SP mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed to
the LP mode. Note that some interference will appear on the picture at the point the
tape speed is changed. If you want to keep the same tape speed, set AUTO TAPE
SPEED to OFF in the TAPE OPTIONS menu (page 52).
Notes
• When setting the timer with VPS/PDC signals, enter the start and stop times
exactly as indicated in the TV programme guide, otherwise the VPS/PDC function
won’t work.
• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit
VPS/PDC signals, the VCR will start recording at the set time without using the
VPS/PDC function.
• The
indicator flashes in the display window when you press ON/STANDBY
with no tape inserted.
Summary of Contents for SLV-E295UX
Page 67: ...66 Additional Information ...
Page 68: ...67 Additional Information ...
