Sony SIR-3032i, Instruction Manual

Page: 24 / 156

3-4
(E)
SIR-3400H / SIR-3032i / SIR-3032W
qg
Bar meter display area
This area displays the bar meters for each channel.
A single bar meter indicates one channel. A maximum of 16 channels can be displayed from left to right.
The displayed channels vary depending on if the red frame is lit for A or B in the measuring unit number
display area
w;
.
A: Channels 1 to 16 B: Channels 17 to 32
Selection of a bidirectional or unidirectional bar meter is made using the Barmeter Scale setting (section
9-2-2).
qh
ID display area
This area indicates the ID number.
The displayed information varies depending on the transport mode.
Transport mode Display
E-E, REC-PAUSE, REC, and succeeding STOP Value set in recording unit
FWD and succeeding STOP Value recorded on recording media
qj
INDEX display area
This area indicates the INDEX number.
The displayed information varies depending on the transport mode.
Transport mode Display
E-E, REC-PAUSE, REC, and succeeding STOP Value set in recording unit
FWD and succeeding STOP Value recorded on recording media
qk
Speed display area
This are displays the speed of the recording media.
The displayed information varies depending on the transport mode.
Transport mode Display
E-E, REC-PAUSE, REC, and succeeding STOP Value set in recording unit
FWD and succeeding STOP Value recorded on recording media
ql
Recording media position display area
The displayed information varies depending on the transport mode.
Transport mode Display
E-E, REC-PAUSE, REC, and succeeding STOP ADDRESS, REMAIN, and S-TIME values set in
recording unit
FWD and succeeding STOP ADDRESS, REMAIN, and R-TIME values
recorded on recording media
ADDRESS : Displays the recording media position from the (00H00M00S) of each recording block in
hour, minute and second.
.
The address is set automatically to 00H00M00S when recording begins.
.
The address counts in step with real time at 1
x
speed, and slows down in proportion to
the speed at 1/2 speed or slower.
. In addition, when operating at 1/2 speed or slower, the lower digit for indication of
seconds blinks at a rate of once per second.
REMAIN : Displays the amount of recording media remaining in hour and minute according to the
speed.
S-TIME : Displays the current time in recording unit in year/month/day and in hour/minute/second.
R-TIME : Displays the time recorded on the recording media in year/month/day and in hour/minute/
second.
3. Names and Functions of Parts